DIY, Projects

Magazine Table 2

I got outside about 8:00 yesterday morning and started sanding on the magazine table. I thought I would just do hand-sanding with pieces of sandpaper and sanding blocks, because it was still early for many people and I didn’t want to wake anyone up with my loud electric Mouse sander. But, when I looked in my sandpaper stash, it turned out I only had one small piece of 100-grit sandpaper and the next one up was 220. I was using the 100-grit on the top shelf of the table, but it wasn’t even doing a very good job, and it especially didn’t seem to help on the edges of the table. I had to go to Lowe’s to get some wood conditioner so I put sandpaper on the list too. While I was there I bought some Minwax Polyshades stain and poly in one can, in the shade Espresso, because I wasn’t sure if the old stain I had in the shed would still be good.

When I got back from my shopping I got out the Mouse and started on the top of the table. I sanded it smooth, but the big dark spot wouldn’t sand out. I hoped the stain would be dark enough to mostly cover the spot.

Dark spot won’t come out.

Although the table has two “good” sides – meaning that it’s finished on both sides instead of having one side you would put against the wall – one of the sides is more dinged up than the other and has the deep scratches seen here. I’m hoping that the stain will cover these as well so they don’t look so glaring.

How do things like this happen?

For now I plan to use it as an end table in the living room with one side against the arm of the couch, and I will put my magazines in it instead of in the two-tiered metal basket I’ve been using for years for magazine display. I love the basket, but I think it’s time for a change.

Since I was sanding the magazine table, I decided to go for sanding this folding/TV tray I got at a garage sale as well. It once had a honey oak finish (can be seen underneath), but it looks like it was left outside and the finish is worn away on the top and the legs. I debated painting it with an off-white chalk-style paint and then stenciling the top, or just staining the top and painting the legs, but at this point I’ve decided to stain the whole thing the same color as the magazine table. The top is such nice wood that I thought it would be a shame to paint over it. It must have cost someone a pretty penny at one time! (I mean, have you priced TV trays lately? Even on Amazon the costs are prohibitive! Plus, the stencil I liked would have cost $22 with shipping.)

I sanded and sanded and sanded some more. There are all sorts of nooks and crannies in the magazine table and it was hard to get at many of them. I also found some stripper that was still hiding here and there and had to use my steel wool dipped in mineral spirits to get that off. I usually don’t sand with gloves on, so I kept forgetting to put my glove on when I was using the mineral spirits. Oops! Of course, if they made chemical-resistant gloves that would fit my short little fingers…

Once I thought the table was sanded enough, I started on the TV tray. That one was easy and zoop zoop it was done. I used the tack cloth to get the sanding dust off of both projects and then I was ready to stain the magazine table.

How do you think the projects will turn out? TUNE IN TOMORROW FOR RESULTS!